is Inventel's Class 2, Bluetooth Module designed for mid-range communications.
It's main features include:
Mid-Range : Class 2 (4dBm) output power and very high sensitivity ( 80dBm)
Audio capabilities included : 1 codec, audio interface for microphone and receiver included
High-speed serial port UART, SPI, I2C, free GPIO, ADC, DAC, analog audio, power supply.
Bluetooth 1.1 protocol layers included up to HCI
Point to Multi-point operation
Baseband and radio Bluetooth 1.1 qualified
Small size : 15 x 32 mm
A development kit for the miniBlueBird is also available. This kit includes 2 miniBluebird modules, 2 interface cards with their cables, 1 CDRom with examples of HCI commands. The buying of this kit gives 4 weeks of free technical support.
KC Technology focuses on providing interoperable wireless connectivity by delivering Bluetooth solutions for mobile, home, and business applications.
KC8101 Compact Bluetooth Module is an compact Bluetooth module (20.5mm x 15mm x 2.2mm). It designed for the most space conscious Bluetooth applications. Based on the µPAX KC2680 Bluetooth Controller and industry radios. KC8101 is a 0dBm Class 3 device with receiver sensitivity of -80 dBm; it is designed to meet FCC, ETS and ARIB regulatory requirements. Bundled with µStack, KC's Bluetooth software stack; KC8101 enables a complete integrated system solution. Click here to download a PDF file on the product.
Korea Wireless Network does research, development and commercialization of Bluetooth system solutions.
Features include: Samsung BlueSEM I - Bluetooth v1.1 Module (Class 2), Interface : UART, USB, SPI, Audio Interface : PCM Data I/O, Power : Use USB Power (or +5V power adapter), Size : 79 * 54 (mm).
The company focus on telecommunications defense initiatives but have more recently diversed into providing a number of products using the Bluetooth Technology.
& Class 2 Bluetooth Module incorporating RF, BB, LM and HCI.
Bluetooth Module(LBMX-2001) is a basic solution for implementing Bluetooth technology in electronic device. LBMx Series is LGITs Bluetooth Module for mobile phone, PDA, mobile PC applications, and etc. It provides fully compliant Bluetooth system for both data and voice communications. Physical interface to HOST supports UART, USB and it fulfils full Bluetooth data rate 723.2k/57.6kbps. It features: Output Power : 4dBm max, Low power consumption, SMD Type, UART, USB and PCM interface, enable Built-in RF shield, Internal crystal oscillator, HCI Firmware embedded, Small size (25x14.5x3 mm).
A spin-off of AT&T September 1996, Lucent Technologies launched its separation with an initial public offering of stock issued in April 1996. Lucent has become a player in optical, data, and wireless networking; Web-based enterprise solutions that link public and private networks; communications software; professional network design and consulting services; and communications semiconductors and optoelectronics.
Bluetooth Transceiver Module is a highly integrated Class 2 RF module including RF transeiver IC, antenna filter and transmit / receive baluns.
Company Website (Japanese)
& BTM01 Compact Bluetooth module containing RF, Baseband and Link Manager. - further details unavailable, e-mail if you can help us.
Bluetooth Module Class 1 module. - further details unavailable, e-mail if you can help us.
Mitsumi was founded in 1954 and is a worldwide manufacturer of electronic components and PC peripherals.
WML-C06 Bluetooth Module Wireless communication module conforming toBluetooth Ver. 1.1. This product was Bluetooth standard certified in June, 2001. Suitable for: Notebook PCs, Head Set, Mobile Phones, Digital Camera, PC Peripherals, PDA. Features: Ultra-small and thin size, SMD type can be surface mounted, supports communications of up to 10m, UART, USB and PCMIF interfaces enable wide range of applications, Conforms to FCC, CE and other countries' EMI standards, Supports Bluetooth Class2 (CLASS 1-supporting WML-C07 also available), Two types of models: With/without an antenna are provided.
WML-C07 Bluetooth Module Wireless communication module conforming to Bluetooth Ver. 1.1. This product was Bluetooth standard certified in November, 2001. Applications include notebook PCs, PC peripheral equipment such as printers and terminal adapters, and various other types of equipment. Features: Ultra-small and thin size achieved through use of high density mounting technology, Simple installation, High sensitivity supports communications of up to 100m, UART, USB and PCMIF interfaces enable wide range of applications, Conforms to FCC, CE and other countries' EMI standards, Supports Bluetooth Class1 (CLASS 2-supporting WML-C06 also available), Uses connector to connect to main unit.
WML-C09 Bluetooth Module Wireless communication module conforming to Bluetooth Ver. 1.1. Applications include notebook PCs, cellular phones, digital cameras, PDA, PC peripheral equipment such as printers and terminal adapters. Features include: Reducing the size and thickness greatly due to the high-density surface mounting technology, Long-distance communication due to its high sensitivity, UART, USB and PCM interfaces available to various applications, Conforms to FCC, CE and the EMI standard of each country, Conforming to Bluetooth Class2, Operating temperature range : 40~+85°C.
WML-C11 Bluetooth Module Wireless communication module conforming to Bluetooth Ver. 1.1. Applications include Notebook PCs, PC Peripherals, PDA, Access point. Features include: Long-distance communication due to its high sensitivity, UART,USB and PCM interfaces available to various applications, Conforms to FCC, CE and the EMI standard of each country, Conforming to Bluetooth Class1, Operating temperature range : 40~+70°C, Two types of models: With/without an antenna are provided.
Mitsumi Bluetooth Module - further details unavailable, e-mail if you can help us.
Motorola provides integrated communications solutions and embedded electronic solutions. This includes wireless communications, making end-to-end systems, embedded semiconductor solutions and embedded electronic systems.
Murata Manufacturing Co., Ltd. is an integrated electronic components manufacturer.
BlueModule type 4 is a very small Bluetooth module containing RF, Baseband and Link Manager. - further details unavailable, e-mail if you can help.
BlueModule type3 is a very small Bluetooth module containing RF, Baseband and Link Manager. - further details unavailable, e-mail if you can help.
BlueModule type1 is a very small Bluetooth module containing RF, Baseband and Link Manager. - further details unavailable, e-mail if you can help.
The LBDU1AA2 BlueDevice Type1 is a thin, ultra small (10mm x 8mm x 1.5mm) complete Bluetooth RF solution. MuRata LTCC technology provides a small enough solution to allow CDMA cellular phone manufacturers to incorporate Bluetooth in their products. - further details unavailable, e-mail if you can help.
Nagano JRC is a technology-oriented electronic manufacturer in the fields of telecommunications equipment, office automations equipment, power supplies and electronic parts.
Nagano Class2 Bluetooth Module is a small Bluetooth module containing RF, Baseband and Link Manager. It is a complete module that includes RF IC, Baseband IC, Flash Memory and System Clock. It has data interface: UART, USB and PCM. as well as HCI Firmware included. Download PDF File.
Based in California, National Semiconductor combines analog and digital technologies to create integrated solutions. National provides solutions for the information appliance, personal computing, consumer and communication markets.
LMX9814 - Bluetooth Module, Wireless Personal Area Network (WPAN) highly integrated radio and baseband system.
Conforms to Bluetooth Specification (Ver 1.1)
Frequency range: 2402 to 2480MHz
79 Channels (1MHz spacing)
Output Power: Class 2
Receive Sensitivity: -75 dBm typical (BER 0.1%)
Modulation System: GSFK (1Mbps)
UART Interface (1200bps to 921.6kbps)
- Application side: 8/16-bit linear, A-Law, µ-Law
- Bluetooth side: CVSD, A-Law, µ-Law
Integrates TCXO: 13 MHz
Integrates HCI Firmware
Integrates 20 pin connector for HCI Interface
Integrates Flash ROM (4 Megabits)
Form Factor: 18 x 39 x 2.7mm
Voltage Supply: DC +3.3V (±5%)
Operating Temperature: 0 ~ +50°C
Weight: 3.4gr (MK70120 with on-board antenna)
Supports RF and Baseband as defined in Part B of the Bluetooth Core Specification Ver1.1 including all mandatory features and all optional features, excluding 23 channel hopping mode, SCO links from different masters, Optional paging scan modes 1, 2 and 3, Paging mode R2, Scatternet
Link Manager as defined in Part C of the Bluetooth Core Specfication Ver1.1 including all mandatory features and all optional features, excluding PARK mode, Power control, Channel quality driven data rate, RSSI, Broadcast encryption, Requesting and accepting page mode and page scan mode
Download pdf info sheet
Penell (An RTX Company)
Penell A/S serves manufacturers and others who want to implement communication technology into devices, products and instruments. It is a development and design house specialising in wireless communications with particular focus on Bluetooth applications.
CSR BC01B "Copy'n Paste" Bluetooth solution, available through Pennel. It features: Onboard microstrip PCB antenna, +4 dBm output (Range >20 meters), PCB is 4 layer with microvia, Bluetooth RF Qualified, Evaluation board available (PE1810). The solution is also available in a +20dB version for Bluetooth Class 1 applications.
Philips Semiconductors focuses on silicon systems for consumer electronics, telecommunications, automotive, computer peripherals and networking, offering development kits that support their Blueberry range of Bluetooth IC products.
Philips is a key player in the development of Bluetooth technology and standards, and is leading the way in developing innovative network concepts for Bluetooth. Philips Semiconductors offers advanced, low-cost Bluetooth chipsets and an RF Bluetooth product range enabling complete solutions to be built rapidly, with no need for RF design experience.
The BGB100 TrueBlue Plug-and-Play Bluetooth radio module is a short-range radio transceiver for wireless links operating in the globally available ISM band, between 2402 and 2480 MHz. It is composed of a fully integrated, state-of-the-art near-zero-IF transceiver chip, an antenna filter for out-of-band blocking performance, a TX/RX switch, TX and RX baluns, the VCO resonator and a basic amount of supply decoupling. The device is a "Plug-and Play" module that needs no external components for proper operation.
Details of other Philips products can be found on the Development Kits, Modules, Semiconductors - Baseband & Controllers, Semiconductors - RF
PrimeNet concentrates on providing application specific home networking reference chip and system solutions. Specialized in Bluetooth, other home networks such as IrDA and powerline communication solutions can be offered.
Class 1, 2
1. Wireless communication module corresponding to Bluetooth specification V1.1
2. UART, USB HCI and PCM audio interface available to various applications
3. Compact package size
4. High sensitivity feature supports communications up to 100m (class1), 10m (class2)
5. Built-in flash memory for on chip link controller and manager.
6. Small size and thickness using high-density surface mounting technology
7. On board antenna or customized antenna choices available
8. Easy interface with any system PCB
Siemens is a global company that is involved in a large number of electrical markets including wireless communications and Bluetooth
SieMoS Module Stand-alone serial module SieMo S500037 for serial applications - Download PDF.
This company provides wireless communications products from components to system solutions. Formed in 1999 Signia Technologies supports short-range, low-power wireless communications - such as Bluetooth.
A drop-in module designed to implement class 2 and 3 Bluetooth functionality into any electronic device. The module consists of a 0dBm Bluetooth module with software and has a single DC connector for all UART, PCM, USB, power, and ground signals. A low profile RF connector provides the external antenna connection.
A higher-power Bluetooth compliant RF module than the BTM 2000 designed to provide better performance over a standard Bluetooth radio, with a range of up to 100 meters. The module has a single DC connector for all UART, PCM, USB, power, and ground signals. A low profile RF connector provides the external antenna connection.
SMART is a manufacturer of standard and custom computer memory modules, ATA, Linear Flash and compact flash cards, voltage regulator products and a producer of wireless communications devices and wireline communication sub-systems.
"Blue Topaz" is a minimodule based on the Infineon BlueMoon PMB8760 device. It is Class 2, v1.1 compliant and features 2MB flash memory for firmware, controlled via a UART interface and 6-pin connector. For a total Bluetooth solution, the module requires a host processor and Bluetooth Protocol stack software.
"Blue Lapis" is based on the Broadcom BCM 2033 device, a Hitachi SH7034B controller, 8MB flash memory, Texas Instruments UART and an Intersil RS232 transceiver. It is Class 2, v1.1 compliant.
Blue Sapphire is a v 1.1 compliant module based on the Odyssey SiW 1502 Radio Modem and SiW 1602 Link Controller ICs developed by Silicon Wave, together with a Hitachi H8 processor. An on board 8-pin connector provides UART and USB interfaces. An adapter board provides access to an RS232 interface through a DB9 connector. The adapter board also has a USB device connector, DC power connector and power switch. For a total Bluetooth solution, the module requires a host processor and Bluetooth Protocol stack software.
A Type II PCMCIA card based around the Blue Sapphire is also available, which incorporates the Impulsesoft protocol stack and Rangestar antenna. Information here.
Established over 50 years ago, Tokyo-based Taiyo Yuden Co., Ltd. is a worldwide manufacturer of surface mount and leaded passive components, power electronics modules and power supplies. Taiyo Yuden reports annual sales of nearly US$1.6B. Worldwide. Taiyo Yuden employs more than eighteen thousand people, and the company's North American affiliate, Taiyo Yuden (U.S.A.), Inc., operates sales and engineering offices in Chicago, San Jose and San Diego County
Bluetooth v1.1 Module:
Power - 0dBm, 4dBm
Dimensions 32mm x 16mm x 2.4mm - see picture
Further information available on request from Taiyo Yuden
Taiyo Yuden's first Bluetooth module uses Silicon Wave's IC technology.
TECOM Co., LTD., a Taiwan based OEM, ODM manufacturer providing telecommunication products, such as Bluetooth, WLAN, xDSL, iDSLAM, Cordless phone, business communication equipments etc.
Bluetooth module - BT3010 allows Bluetooth system developers to integrate BT3010 module, which supports up to class 1 power output and USB, UART, PCM interfaces, into their product design.
Wistron NeWeb Corporation (WNC), is a member of Acer Group's DMS (Design and Manufacturing Service) Division. It is a high-tech manufacturer specializing in the field of advanced wireless communication.
Embedded Module suitable for Bluetooth enabled PCs, it provides a total solution which includes antenna, system integration and application S/W.